BULLDOG® High Solids Silicone Coating #203 for Provides elemental protection for architectural surfaces such as
Bulldog High Solids Silicone Coating 203 is summarized here using source-supported Product Data Sheet information for contractors reviewing Silicone products.
Built for Provides elemental protection for architectural surfaces such as
Product Type: A ready-to-use, solvent-free, high-solids, single-component, moisture-cure fluid-applied silicone coating. Breathable membrane possessing superior weathering and water resistance characteristics. MEETS: ASTM D6694-08 and 07. SRI Value 110 initial. Passed: ASTM C1305 Crack Bridging Ability. Recommended Uses: Provides elemental protection for architectural surfaces such as vertical walls, masonry, concrete, metal, single ply roof membranes, and sprayed in place urethane systems. Contact Palmer Asphalt Company for applicability for specific roof surfaces. This product is generally used as a protective coating over a variety of surfaces to protect and prolong the life of the underlying roof membrane. A pull test is recommended prior to use over specific roof membranes. When applied in white, this product will reduce roof temperatures that will result in energy cost savings in
Recommended Uses
- Provides elemental protection for architectural surfaces such as vertical walls, masonry, concrete, metal, single ply
- sprayed in place urethane systems
- Contact Palmer Asphalt Company for applicability for specific roof surfaces
Application Guidance
Surface preparation: the application of the coating. Mixing Procedures: No thinning or reducing is necessary. Product may separate after shipping and storage, though it may still look mixed. MIX WELL BEFORE USING. When mixing becomes necessary we recommend the use of a 3/4 Coverage rate: Application: Minimum application is 1 1/2 gallons per 100 square feet for a single coat depending upon surface to which it is applied Service temperature: 185° F (85°C) Dry time: 1-2 hours/ Temp.&Humidity Dependent Limitations / weather restrictions: or directly over modified Bitumen, asphalt or coal tar built-up roofing systems without a sealer/primer. Ponding Water: Palmer Asphalt does not cover damage due to ponding water. •The National Roofing Contractors Association considers ponding water on any
Why Contractors Choose BULLDOG
Palmer Asphalt manufactures BULLDOG roof coatings, cements, primers, and related building products. This product summary keeps the focus on the Product Data Sheet details listed above.
Product Documents
A Product Data Sheet is available for this product.
