BULLDOG® Primer Silicone Coating Primer for Asphalt Roofs #a2

#A2 BULLDOG® Primer is a two component, 1 to 1 ratio, water based epoxy primer.

Not sure which BULLDOG® product fits the job? Request a free roof analysis and Palmer Asphalt will help point you in the right direction.

BULLDOG® Primer Silicone Coating Primer for Asphalt Roofs #a2 for Used on asphalt roof surfaces prior to application of #201LS

Bulldog Primer Silicone Coating Primer for Asphalt Roofs a2 is summarized here using source-supported Product Data Sheet information for contractors reviewing Silicone products.

Built for If blowholes form as the primer dries make second pass with a

#A2 BULLDOG® Primer is a two component, 1 to 1 ratio, water based epoxy primer. Part A is white and Part B is black to dark gray and when combined the color is medium gray.

Recommended Uses

  • Used on asphalt roof surfaces prior to application of #201LS BULLDOG® Silicone Coating to limit bleed through of
  • provide as an adhesion promoter for the use of subsequent coatings.

Application Guidance

Surface preparation: surfaces prior to application of #201LS BULLDOG® Silicone Coating to limit bleed through of asphalt fractions and provide as an adhesion promoter for the use of subsequent coatings. product Limit AtionS Do not apply to surfaces that are below 50°F or above Application method: If blowholes form as the primer dries make second pass with a relatively dry roller. Use a 1/4“ or 3/8“nap roller or nylon brush. Coverage rate: is approximately 200 to 400 square feet per gallon Service temperature: 40ºF to 180ºF (-40ºC to 82ºC) Dry time: Dry to touch in 1 hour or less; depending upon temperature and humidity. Full cure in 24 hours Cleanup: with water supplemented with soap or a small quantity of vinegar. MEK is recommended for both cleaning and drying spray equipment in order to avoid corrosion Limitations / weather restrictions: Do not apply to surfaces that are below 50°F or above 130°F. Do not apply when it is raining or threat of rain exists. Do not apply when the dew point is less than 5°F above ambient temperature. This product is designed for professional installation. Caution

Why Contractors Choose BULLDOG

Palmer Asphalt manufactures BULLDOG roof coatings, cements, primers, and related building products. This product summary keeps the focus on the Product Data Sheet details listed above.

Product Documents

A Product Data Sheet is available for this product.